Shreeji Expeller Industries Ludhiana, Punjab

Send SMS
Contact Us

Cotton oil Expeller

Cottonseed Oil Expeller

Cottonseed Oil Expeller

All Steel Fabrication and Improved Design.
For perfect alignment and stability.
Vertical Hinged 44” Four-section Pressing Box.Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves lot of time and labour.
Steel Casted Chambers Reduces time and labour for relining of Cage Bars.
Shaft Withdrawal The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way and pressure worms and spacing collars can be changed without disturbing the shaft. The thrust of the pressure worm is taken upon a large thrust bearing.
Pressure Cone The final pressure of the cake is positively controlled by a Pressure Cone which is hard faced.
Cake at Discharge The cake thickness is controlled by a manually operated hand-wheel which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on expeller motor.

Cotton Seed Oil Extraction Machine

Cotton Seed Oil Extraction Machine

All Steel Fabrication and Improved Design.
For perfect alignment and stability.
Vertical Hinged 44” Four-section Pressing Box.Entirely eliminates the difficult task of removing box for relining or for replacement of worms, which saves lot of time and labour.
Steel Casted Chambers Reduces time and labour for relining of Cage Bars.
Shaft Withdrawal The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way and pressure worms and spacing collars can be changed without disturbing the shaft. The thrust of the pressure worm is taken upon a large thrust bearing.
Pressure Cone The final pressure of the cake is positively controlled by a Pressure Cone which is hard faced.
Cake at Discharge The cake thickness is controlled by a manually operated hand-wheel which is so simple that the choke gear is independent of the main drive and there is no possibility of a sudden load being placed on expeller motor.
Compressor Expeller feed is under automatic control and the seed or meal when entering the Expeller is given a preliminary compression by a small crammer-shaft driven by an automatically tensioned belt which stops when feed is excessive, starting again when the accumulation has been absorbed by the Expeller.

Cottonseed Oil Mill

Cottonseed Oil Mill

GearBox : Double reduction Gear box
Capacity : The capacity, however, varies with the material and working conditions.The average capacity is 5 to 6 Ton Per24 Hour
Power : The power required is 20 H.P.Motor
Kettle / Cooker : Single stage cooker for the conditioning of seeds, size 26″ Diameter
Chamber : Vertical and can very easily be opened for replacement of worms or cage bars.
This saves a lot of time and labour.
Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars Bearings
Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation
Low initial investment, easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.Reduced internal wear and tear Best Quality of Oil & Cake.
Maintenance is less & easy Hardened Worm Assembly
Cast Iron Bodies : For perfect alignment and stability.

Cottonseed Oil Machine

Cottonseed Oil Machine

Gear Box : Double reduction Gear boxKettle / Cooker : Multi stage cooker for the conditioning of seeds,size 42″ DiameterCompressing : Crammer Shaft gives extra Cramming of the seed or cake in the FeedChamber : Vertical Hinged and can very easily be opened for replacement of wormsor cage bars. This saves a lot of time and labour.Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars.Bearings : Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operationShaft Withdrawal : The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way. Pressing worms and collars can be changed without disturbing the main shaft. The thrust of the pressure worms is taken upon large spherical roller thrust bearings.Cast Iron Bodies : For perfect alignment and stability.Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.Reduced internal wear and tearBest Quality of Oil & Cake.Maintenance is less & easyHardened Worm AssemblySteel Fabricated Base

Cotton Oil Mill

Cotton Oil Mill

GearBox : Double reduction Gear box
Kettle / Cooker : Multi stage cooker for the conditioning of seeds
Chamber : Vertical Hinged and can very easily be opened for replacement of worms or cage bars.
This saves a lot of time and labour.
Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars.
Bearings : Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation.
Compressing : Crammer Shaft gives extra Cramming of the seed or cake in the Feed
Shaft Withdrawal : The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way.
Pressing worms and collars can be changed without disturbing the main shaft.
The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.
Reduced internal wear and tear
Best Quality of Oil & Cake.
Maintenance is less & easy
Hardened Worm Assembly
Cast Iron Bodies: For perfect alignment and stability.
Steel Fabricated Base.

Cottonseed Oil Extraction

Cottonseed Oil Extraction

GearBox : Double reduction Gear box
Kettle / Cooker : Multi stage cooker for the conditioning of seeds
Chamber : Vertical Hinged and can very easily be opened for replacement of worms or cage bars.
This saves a lot of time and labour.
Steel Fabricated Chamber: Reduces time and labour for relining of Cage Bars.
Bearings : Heavy duty Ball and Roller bearings are fitted for maximum life and low noise operation.
Compressing : Crammer Shaft gives extra Cramming of the seed or cake in the Feed
Shaft Withdrawal : The main Worm Shaft can be withdrawn very easily without disturbing the gear section in any way.
Pressing worms and collars can be changed without disturbing the main shaft.
The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
Easy to install, high yield at low operating cost, capable of extracting oil from all known oil seeds.
Reduced internal wear and tear
Best Quality of Oil & Cake.
Maintenance is less & easy
Hardened Worm Assembly
Cast Iron Bodies: For perfect alignment and stability.
Steel Fabricated Base.

Cottonseed Oil Mill Machinery

Cottonseed Oil Mill Machinery

Vertical Hinged Chambers : Pressing Box eliminates the difficult task of removing box for replacement of worms.
Chambers : Reduces time and labour for relining of Cage Bars.
The main Shaft of the Expeller is of alloy steel construction, fitted with High Pressure Worms, hard faced, with a highly wear resistant alloy.
Shaft Withdrawal : The main Worm Shaft can be withdrawn easily without disturbing the gear section.
The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
OIL SEEDS APPLICATIONS
Shaft Withdrawal : The main Worm Shaft can be withdrawn easily without disturbing the gear section.
The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
Gear Box & Lubrication : Triple helical gear unit made from most suitable special steel, running in oil bath.
All shafts run on antifriction bearings.
Drive housing is oil tight and dust proof, totally enclosed design and is fitted with level indicator.
Aself contained lubrication arrangement has been provided.
Kettle / Cooker : Multistage vertical stack cooker for proper conditioning of the seeds.
Lower Operation and Maintenance Cost : Due to sturdy construction and stringent quality norms our machines work with higher efficiency and incur lower maintenance costs.
Premium expelled Oil Quality : Well designed worm assembly and chamber construction ensures superior quality of expelled oil.
Superior Quality of Cake : The cake quality is excellent and cake produced from the machine is of natural colour without charring or burning effect.
Power: The power required is 3-Phase 50 H.P.Motor.
Capacity : The crushing capacity is 15 to 16 Tons per 24 hours.

Cotton Oil Extraction

Cotton Oil Extraction

Chambers : Reduces time and labour for relining of Cage BarsThe main Shaft of the Expeller is of alloy steel construction, fitted with High Pressure Worms, hard faced, with a highly wear resistantalloy.
Shaft Withdrawal : The main Worm Shaft can be withdrawn easily without disturbing the gear section.
The thrust of the pressure worms is taken upon large spherical roller thrust bearings.
Gear Box & Lubrication : An improved triple helical parallel shaft gear unit made from most suitable special steel, running in oil bath.
All shafts run on antifriction bearings.
Drive housing isoil tight and dust proof, totally enclosed design and is fitted with level indicator.
Aself contained lubrication arrangement has been provided.
Kettle / Cooker : Multistage vertical stack cooker for proper conditioning of the seeds.
Lower Power Consumption: The Selection of motors is done keeping in mind the peak load that could arise due to inconsistent feeding resulting in lower power consumption.
Premium expelled Oil Quality : Well designed worm assembly and chamber construction ensures superior quality of expelled oil.
Superior Quality of Cake : The cake quality is excellent and cake produced from the machine is of natural colour without charring or burning effect.
Retention of oil in Cake : Superior process parameters ensure accurate retention of oil in the cake.
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Cotton oil Expeller ?

    country-ico

    We will contact you soon !

    Amit

    Shreeji Expeller Industries

    Sahibjada Ajit singh Nagar, Ludhiana, Punjab, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us